Panasonic AW-PH400P Instrukcja Użytkownika Pobierz pdf (Strona 27)

Pan/Tilt Control Panel AW-RP400

AW-RP400

Parts and their function

P REMOTE connector

Connect an external unit to this connector to control the

pan/tilt head systems from a PC or other external unit.

Connect the connector to the PC using the AW-CA50T9

RS-232C cable.

Q DC 12V IN socket

Connect the AW-PS505 AC adaptor (sold separately) to

this socket.

R CONTROL OUT TO PAN/TILT HEAD [P1] to [P5]

connectors

Connect these connectors to the IP/RP connectors on the

AW-PH400 indoor pan/tilt heads using 10BASE-T

(equivalent to UTP category 5) straight cables. The

cables can be extended up to a maximum of 500 meters.

S MONI SEL OUT connector

Connect this connector to the MONI SEL OUT connector

on the AW-RC400 cable compensation unit using a

10BASE-T (equivalent to UTP category 5) straight cable.

You can monitor the images of the system selected by

the AW-RP400 from the MONITOR1 connector on the

AW-RC400 and the images of the system selected by the

AW-CB400 from the MONITOR2 connector on the

AW-RC400.

If two AW-RP400 units are connected, you can monitor the

images of the system selected by the master AW-RP400

from the MONITOR1 connector on the AW-RC400 and the

images of the system selected by the slave AW-RP400

from the MONITOR2 connector on the AW-RC400.

T CAMERA CONTROL IN FROM ROP connector

Connect the AW-CB400 remote operation panel to this

connector using the connecting cable packed with the

AW-CB400.

The cameras installed on the pan/tilt heads can now be

controlled from the AW-CB400.

U Ground terminal

Connect this terminal to ground.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Brak uwag

Panasonic AW-PH400P Instrukcja Użytkownika Strona 27