Panasonic AW-E650 Informacje Techniczne

Panasonic Broadcast AW-E650 Menu Information

-39-3. Noise Suppress Level Setting [Noise Suppress: OFF, LOW, HIGH]Screen noise can be reduced when Detail Level set-ting (4-2) is at HIGH or LOW.4.

-40-Shutter SpeedOFF1/1001/2501/5001/1 0001/2 0001/4 0001/10 000Required luminance ratio1248163264160Synchro-scan-100.3 Hz250.0 Hz492.2 Hz984.4 Hz1.96

-41-5. PC Control Access Speed Setting [Baud Rate: 1 200bps, 2 400bps, 4 800bps, 9 600bps]Select a communication speed in controlling thecamera from t

-42- Sub Menu (User Mode)**Iris,Shutter,Gain Set** Picture Level ±0 Light PEAK/AVG ±0 Light Area Top Cut Auto Iris Adjust OF

-43-**Color Matrix Set 1** B_Mg Gain ±0 B_Mg Phase ±0 Mg Gain ±0 Mg Phase ±0 Mg_R Gain ±

-44-4. Auto Iris Level Fine Adjustment [Auto Iris Adjust: ON, OFF]ON: Fine adjustment of auto iris convergence levelcan be made with the iris control

-45-5. Electronic Shutter Mode Setting [Shutter Mode: Step, ELC, S/Scan]Step: Electronic shutter operates at the speedselected by the Electronic Shutt

-46-7. Gain Setting [Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H](models AW-E750, AW-E655, AW-E650) [Gain: Auto 0 dB to 30 dB, N/Eye] (model AW-E350)W

-47-8. Digital Gain Up Setting [Digital Gain Up: 0dB, 6dB, 12dB, 18dB, 24dB, 30dB]This can be set when a setting other than “Auto” hasbeen selected as

-48-7Color Set Display1. Chroma Level Adjustment [Chroma Level: –3 to +3]Chroma Level can be decreased or increased tothree levels.2. White Balance Se

-31-MENU ITEM SETTING MENU ITEM SETTING• Each of the four use modes of the camera has amain menu. (Shown at right)• Each item of the main menu has a

-49-6. Negative/Positive Selection [Nega/Posi: Posi, Nega]Posi: Normal imageNega: Image is shown reversed in darkness andcolor.8G/L Adjustment Set Dis

-50-7. Noise Suppress Compensation Level Setting[Noise Suppress: 1 to 10]Screen noise can be reduced with the Detail LevelSetting (9-1) at HIGH or LOW

-51-:Color Matrix Set DisplayB_Mg Gain: Increases or decreases the intermedi-ate color between blue and magenta.B_Mg Phase: Varies the hue of the inte

;Other Set Display1. Gamma Correction Level Setting [Gamma: 0.35 to 0.55]Gamma correction level can be set.2. Knee Compensation Level Setting [Knee Po

-53-14. Auto Focus Setting [Auto Focus: OFF, ON] (model AW-E655)This enables auto focus ON and OFF to be controlledwhen the zoom/focus cable of a Cano

-54-SETTING AND CHANGING THE OPTIONAL CARDS<Optional Card Setting Sub MenuThis sub menu appears when a studio card (AW-PB506 or AW-PB305) has been

-55-2. Zebra Level Setting [Level: 70% to 110%]This enables the zebra pattern to be displayed sothat it will provide as a general guideline for the lu

-56- Setting to initial setIn case of the wrong setting in any use mode, take thefollowing steps to return to the initial settings.(1) Select [Initia

-57- INITIAL SETTINGS OF THE SETTING ITEMS (Factory preset values)● Halogen, Fluorescent, Outdoor ModePicture LevelLight PEAK/AVGLight AreaAuto ND (E

-58-Iris, Shutter,Gain SetPicture LevelLight PEAK/AVGLight AreaAuto Iris AdjustShutter ModeStep/SynchroGainDigital Gain UpAGC Max GainCharge Time±00To

-32- SETTING1. From the camera alone:Keep the MENU switch depressed for 5 sec-onds or more.From RCU (RCB):Set the user set switch in the pocket to th

-59-0.4588%110%000OFFOFFOFFOFFHigh151287230%0DetailH Detail Level HV Detail Level HH Detail Level LV Detail Level LDetail BandNoise SuppressLevel Depe

-33-• Settings enclosed in parentheses can be set with the RCU (RCB) switch or VR in RCU (RCB) mode.• To return to the initial settings, refer to page

• ON is automatically selected when the electronicshutter (5-2) on the submenu [Other Set] is set to[Auto ND]. OFF is selected when other than [AutoND

-35-5. Auto Gain Up Control Setting [Auto Gain Up: OFF, ON]This cannot be set when “Auto” has been set for theCCD storage time setting (1-9).OFF: The

9. CCD Storage Time Setting [Charge Time: Auto, OFF, 1/30s, 1/15s, 1/8s, 1/4s,1/2s, 1s, 2s]This is used to set the CCD storage time.Auto: ALC is perfo

-37-2Color Set Display1. Chroma Level Adjustment [Chroma Level: –3 to +3]Chroma Level can be decreased or increased to any of three levels each.2. Ski

-38-3G/L Adjustment Set Display1. Horizontal Phase Adjustment [H Phase: –206 to +49]Horizontal phase can be adjusted when a genlocksignal is supplied.