Panasonic GP-US522HA Instrukcja Użytkownika

Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Operating Instructio

10Mounting the LensCaution :Keep the POWER ON/OFF switch of the camera con-trol unit in the OFF position throughout the installation.Lens Mount1. Remo

111. CAMERA SETUP MENUThis camera utilizes a user setup menu that is dis-played on-screen.The setup menu contains various items that form atree-type s

12• All Reset OperationAll Reset allows you to reset all setup menu items tothe factory settings if you are unsure about the correctsettings. Proceed

131. Camera Identification(CAMERA ID)You can use the camera identification (CAMERA ID) toassign a name to the camera. The camera ID consists ofup to 1

14 ** ELC CONT **AREA ALLPEAK/AVE P...I...ARET ENDONOFFELC1. Move the cursor to the FLM/FRM parameter.2. Select FLM (field) or FRM (

15Note: Detection areas are not displayed on the moni-tor.3. Select the area where backlight is bright by pressingA, B or the ITEM button. ** ELC CO

16ONOFFELC3-2. AGC detection control area setting (AGC CONT)1. Set the ELC ON/OFF selector on the front panel of thecamera control unit to the OFF pos

17If you select AUTO, the gain of the amplifier changes asfollows.When you select MANU, the gain of the amplifier changesas follows.Position GainHIGH

185. Move the cursor to the RGB SYNC parameter.6. Select 4.0V or 0.3V according to the RGB monitor inputlevel.Horizontal Phase Adjustment (H PHASE)1.

198. Supply the video output signal of the camera to beadjusted and the reference gen-lock input signal to adual-trace oscilloscope.9. Set the oscillo

2CONTENTSPREFACE ...

202. Press the PAGE button. The BLACK BAL menu (manu-al black balance setting menu) appears.3. Move the cursor to R-PED. The cursor starts blinking.4.

218-1. Gamma Correction (GAMMA)1. Move the cursor to the GAMMA parameter. The “I” cur-sor starts blinking.2. While observing the waveform monitor or t

22When the camera is aimed towards spotlights or otherbright lights or light reflecting objects, smear or bloomingmay appear.Therefore the camera shou

23SPECIFICATIONSPick-up System: Micro prism systemImage Sensor: Three 1/2" interline transfer (IT) super high sensitivity CCDs (GP-US522)Three 1/

2000 © Matsushita Communication Industrial Co.,Ltd. OPTIONAL ACCESSORIESCamera Cable ... G

3Panasonic's GP-US522/532 Industrial Digital SignalProcessing Color 3-CCD Camera overcomes space limita-tions that have complicated many video ap

4PRECAUTIONS1. Do not attempt to disassemble the camera orcamera control unit.To prevent electric shock, do not remove screws orcovers. There are no u

5MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSCamera Head1. Lens MountThis is used to attach the special C-mount lens for GP-US522 and the C-mount lens

67. Camera/Color Bar Selector (CAM/BAR)This selector is used to select either the video signal orthe SMPTE color bar signal which is output from thevi

7Camera Head Side Camera Control Unit Side1 +15V Input2 Ground (GND)3 Chip Select Input4 +25 Input5 −9V Input6 B Signal Output7 RGB Ground (GND)8 Seri

8S-VIDEO OUT (Mini-DIN,4-pin)Pin No. Description1 Y Ground2 C Ground3 Y Signal Output (0.714V[p-p](Y level)/75 Ω)4 C Signal Output (0.286V[p-p](Burst

9Cautions :1. Keep the DC POWER ON/OFF switch in the OFF posi-tion until all connections have been properly made.2. Connect the camera head and camera