Panasonic WJ-HD716 Instrukcje Operacyjne

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.No model number su

10 Shuttle ring: The following functions are provided. • Fastforward/reverseplaybackcanbeper-formed during playback. y Hold button [HOLD]

100Event functionThe recorder will take an event action when any of the following events occur.Terminal alarm: Regarded as an event when an alarm inpu

101Display the [ALM] button in the status display area Send a mail that notifies of an event occurrenceA mail that notifies of the event occurrence wi

102Step 1Click the [ALM] button displayed in the status display area. → The alarm action will be canceled. Note: • Whenthealarmactioniscan

103Cancel an error actionWhen an error occurred, this recorder will take an error action. To manually cancel an error action, perform the following op

104It is possible to manually copy images recorded in the recorder onto a DVD or an SDHC/SD memory card. It is recommended to make back-up copies on a

105Important: • DonotremovetheSDHC/SDmemorycardduringcopying on the SDHC/SD memory card. It may damage data on the SDHC/SD memory card. •

106Download recorded images currently being playedStep 1Display the top page of the operation window. (☞ Page 77)Step 2Operation can be performed whe

107Step 5Click the [OK] button after selecting "With audio" or "Without audio" to determine whether or not to down-load images wit

108Play the copied/downloaded recorded imagesStep 1Click the [Viewer] button in the download operation area. → The "File download" window

109Step 3Create a new folder in the desired directory and click the [Save] button. → The viewer software will be downloaded. Install the viewer so

11 !2 Menu operation buttonArrows button: Use this button to move the cur-sor on the setup menu, the search menu, etc.[SETUP/ESC] button: Hold down t

110Step 5Click the [Install] button. → When the installation is complete, the installation completion window will be displayed. Step 6Click the [

111Step 1Select "HD_Viewer" from the start menu ("Start" – "All programs" – "Panasonic" – "HD_Viewer"

112Step 1Start operation when playing images using the viewer software.Step 2Click the [PAUSE] button. Step 3Click the [SAVE] button. → The &quo

113Step 1Launch the viewer software and display the following window.Step 2Click the [Open file] button. → The "Open file" window will be d

114Operate the cameraIt is possible to operate the following camera operations when displaying live images from a combination cam-era. Panning/Tilting

115Step 1Display the [CAM] tab. (☞ Page 114)Step 2Zooming can be adjusted by clicking the [–] button (wide) or the [+] button (tele) in the [Zoom] box

116Step 1Display the [CAM] tab. (☞ Page 114)Step 2Click the [C] button, and then select the preset posi-tion number from the following. Home, 1 - 256

117Step 1Display the [CAM] tab. (☞ Page 114)Step 2Click the [C] button in the [Auto mode] box, and then select the desired auto function from the foll

118Step 1Display the [CAM] tab. (☞ Page 114)Step 2Click the [OPEN] button in the [Menu] box. → The setup window will be displayed and the setup menu

119Disk managementStep 1Display the top page of the operation window. (☞ Page 77)Step 2Click the [Setup] button. → The setup menu will be displayed.

12Insert an optional SDHC/SD memory cardStep 1Open the SDHC/SD memory card slot.Step 2Insert an SDHC/SD memory card to the slot until it clicks.Step 3

120Step 5Set time and date after selecting "NML rec." or "EVT rec." for "Data delete". Images recorded until the day bef

121Step 1Display the [Disk] tab. (☞ Pages 119 - 120)Step 2Click the [Execute] button of "SD card format". → The confirmation window will be

122Notification by e-mailAlarm mailA link address to the alarm image that is saved in the recorder contained in an alarm mail as follows. Contents of

123Warning mailThe following mail will be sent to notify of a trouble occurrence to a registered address when the trouble occurs.HD600 (192.168.0.250)

124TroubleshootingBefore asking for repairs, check the symptoms with the following table.Contact your dealer if a problem cannot be solved even after

125Symptom Cause/solutionReference pagesThe image displayed on the browser is not being refreshed. • Dependingonthetrafficofthenetwork,there

126Symptom Cause/solutionReference pagesWhen displaying images on a multi-screen, images from two cameras or more are displayed in sequence on a scree

127Message displayed on the information barDepending on the operation system in use, the following may occur. Follow the instructions below when the f

128Symptom Cause/solutionReference pagesThe following message is displayed on the information bar."To help protect your security, Internet Explor

129GlossaryActiveX ControlA software module developed by Microsoft. It is used to add functions, downloaded from a web server via the Internet or intr

13Step 3Place a disc with the label side up and fit the hole of the disc to the center (spindle) of the tray. Then, push the tray gently. Click sound

130SMTP authentication (Simple Mail Transfer Protocol authentication) SMTP mail transfer protocol appended with a user authentication function. It aut

131Default gatewayNetwork device used as a gateway for networks, such as a local network, to access PCs on an external net-work. Data is sent using th

132ProtocolA set of rules that allows the exchange of data amongst different types PCs with information. The Internet uses the TCP/IP protocol as its

For U.S., Canadian and Puerto Rican fields:Panasonic System Solutions Company,Unit Company of Panasonic Corporation of North Americawww.panasonic.com/

14About the operation windowThe default positions are indicated by the circled numbers. (Broken lined circles are not the default positions.)Important

15The default positions are indicated by the circled numbers. (Broken lined circles are not the default positions.) q Camera title The set camera

16Camera controlThe camera control panel and the camera menu panel will be displayed. It is possible to control a camera, such as panning/tilting, pre

17 w Status display areaIndication Description IndicationLive Indicates that live images are currently being displayed. The sequence display function

18 t Alarm display areaIndication Description IndicationAlarm Indicates that an alarm occurred. "*" indicates the camera channel (1 - 16).

19Indication Description IndicationError 1DOWN: A single hard disk drive in RAID (RAID 5/RAID 6) is faulty (which can be recovered by replacing the

2CONTENTSPreface ... 4About the user manuals ...

20Basic operationTo directly operate the recorder, there are 2 ways of how to operate it: operations using the buttons on the front panel and operatio

21Move the position of a panelIt is possible to move a panel to the other corner of the screen by rotating the jog dial (inside). When rotating the jo

22Operations of the software keyboard for character entryWhen it is necessary to enter characters such as when setting the camera titles on the setup

23Operations using a mouseThe recorder can be operated using a mouse connected to the mouse port (☞ page 11) on the front panel.Move the mouse cursor

24Operations of the submenuThe submenu will be displayed by clicking the [S.Menu] button (☞ page 16) on the status bar. The submenu window is the s

25Operations of the software keyboard for time and date entryWhen it is necessary to designate time and date such as when searching for images recorde

26The software keyboard for character entry can be operated as follows.Up to 255 characters can be entered. Step 1Select a desired character by cl

27Login operation at startupWhen "Off" is selected for "Auto login", the login window will be displayed by pressing any button on

28Monitor live images from camerasWhen the recorder started up, live images from cameras will be displayed according to the configured settings. Live

29Operation using the buttons on the front panelStep 1Press the [MONITOR] button.Each time the [MONITOR] button is pressed, the monitor selection will

3Search and play ... 93Search and play recording events (recording event search) ...

30Display images on a 1-screenTo display live images on a 1-screen, take the following procedures. Operation using the buttons on the front panelS

31Use the electronic zoom When displaying images on a 1-screen, it is possible to enlarge the displayed live images using the electronic zoom. It is a

32Display images on a multiscreenTo display live images on a multiscreen (4-, 7-, 8-, 9-, 12-, 16-screen), take the following procedures. Images will

33Operation using the buttons on the front panelStep 1Select a monitor to display images. (☞ Page 29)Step 2Press the [MULTI SCREEN] button. → Each t

34Display images from multiple cameras sequentially (sequence display)The sequence display function is the function that can automatically switch and

35Pre-event recording areaHard disk driveNormal recording areaEvent recording areaRecording area used for manual recording/schedule recordingRecording

36Record images (Manual recording)Recording can be started and stopped manually. Operation using the buttons on the front panelStep 1Press the [RE

37Step 1Press the external switch to start recording. → The [REC] button will light and the emergency recording will start. Step 2When the set recor

38Image dataMonitor 2Hard disk driveRecorderPlay recorded imagesImages recorded on the recorder will be displayed on monitor 2.Playback images will be

39Operation using the buttons on the front panelStep 2To stop the playback, press the [STOP] button. → The[PLAY/PAUSE]buttonwillgooffandplayb

4The digital disk recorder WJ-HD616K, WJ-HD716K, WJ-HD616K/G and WJ-HD716K/G (hereinafter WJ-HD616K or WJ-HD716K), are designed for use within a surve

40Functions during playback (when using the buttons on the front panel)Function Button OperationPause [PLAY/PAUSE] button • Playbackwillresumewh

41Functions during playback (when using the mouse)Function OperationPause Frame by frame play-back/Reverse frame by frame playback Fast forward/Fast r

42Note: • Whenusingthemouse,theplaybackspeedwillchangeeachtimethe[Rew]buttonorthe[FF]buttonisclicked. When the [Rew] button or th

43Play images from a designated pointIt is possible to start playback from a designated time and date or the latest recorded image. Playback operation

44Operation using the buttons on the front panelStep 1Press the [GOTO LAST] button when displaying live images. → The latest recorded image will be

45Search and playSearch a desired recorded image and play it. There are the following 3 searching methods.  • Searchforrecordingeventsandplay(

46Step 1Press the [SEARCH] button on the front panel. → The recording event list window will be displayed. Note: • Whenusingthemouse,click

47Step 3Specify the search conditions (filters). Date and time range: Designate the recording start time and date and the end time and date of recorde

48Search for copied recorded images and play (copy data search)Display a list of copied data (copied recorded images) on an SDHC/SD memory card or a D

49How to operateStep 1Press the [SEARCH] button on the front panel. → The recording event list window will be displayed.Step 2Move the cursor into t

5Other: CD-ROM drive: It is necessary to refer to the operating instructions on the provided CD-ROM. DirectX® 9.0c or later Adobe® Reader®: It is

50Step 6After specifying the search conditions (filters), press the [SET] button after moving the cursor onto the [OK] button. → Copied data matched

51Search for time and date when a motion was detected from recorded images and play (VMD search)Display a list of time and date when a motion was dete

52Step 1Press the [SEARCH] button on the front panel. → The recording event list window will be displayed.Step 2Move the cursor onto the [VMD] tab,

53Specify the time range Move the cursor onto the [Time & date] button, and then press the [SET] button. → The time & date setup menu will be

54Note: • Todeletethesetdetectionarea,takethefollowingprocedures. 1. Move the cursor onto the [Area delete] button on the search filter

55Step 7Move the cursor onto the [B] (play) button, and then pressthe[SET]button.(Orpressthe[PLAY]buttononthe front panel.) → Playback of t

56Event functionThe recorder will take an event action when any of the following events occur. • Terminalalarm:Regardedasaneventwhenanalarm

57Event action Alarm mode Activity detection mode OffStart recordingb bXDisplay event information on the screenbX XBlink the alarm indicatorbX XSound

58Suspend the alarm actionConfigure the settings to not to perform the alarm action even when an event occurs.It is useful to suspend the alarm action

59Copy recorded imagesStep 1Set a destination media (DVD, SDHC/SD memory card). (☞ Installation Guide)Step 2Press the [Copy] button on the front panel

6Restrictions upon display of imagesWhen displaying images using this product, some functions have restrictions as follows. Before using this prod-uct

60Step 3Specify the detailed conditions of recorded images to be copied. Date and time range: Designate the start time and date and the end time and d

61Step 5After checking the size of the data to be copied and the remaining capacity, press the [SET] button after moving the cursor onto the [Copy] bu

62Operation and configuration when connecting the recorders in cascading connectionWhen connecting the recorders (up to 5 recorders) in cascading conn

63Example of video output (analog) connection Operation using the buttons on the front panelIt is possible to operate using the buttons on the fron

64Operate the cameraStep 1Press the [SUB MENU] button on the front panel. → The submenu window will be displayed. Step 2Move the cursor onto the [Ca

65Step 1Display the camera control panel. (☞ Page 64) Step 2Adjust the horizontal/vertical position of images from the camera using the arrows butt

66Step 1Display the camera control panel (☞ page 64), and then press the camera selection button [2] on the front panel. → The [Focus] tab will be d

67Step 1Move the camera direction to a position to be regis-tered as a preset position. Step 2Display the [Pan/Tilt] tab of the camera control panel (

68Step 1Display the "Preset/Auto" window. (☞ Page 67)Step 2Enter the preset position number to move the camera direction. The preset positio

69Step 1Display the "Preset/Auto" window. (☞ Page 67)Step 2Move the cursor onto "Auto mode", and then select the desired auto func

7Before using this productVideo Motion Detection (VMD) functionThe VMD function of this product detects motions referring to changes of brightness in

70Step 1Press the [SUB MENU] button. → The submenu window will be displayed. Step 2Move the cursor onto the [Camera control] button of the submenu, a

71Disk management Step 1Press the [SUB MENU] button. → The submenu window will be displayed. Step 2Move the cursor onto the [Setup Menu] button, and

72Step 4Move the cursor onto "Disk", and then press the [SET] button. → The [Disk] tab will be displayed.Step 5Move the cursor onto [Next

73Step 1Display the [Disk] tab. (☞ Pages 71 - 72)Step 2Move the cursor onto the [Execute] button of "SD card format", and then press the [SE

74Configure the network settingsStep 1Click "Start" on the task bar, and then click "Control Panel". → The control panel will be

75Step 3Click "Network Connections". → The "Network Connections" window will be dis-played. Step 4Double-click "Local Area C

76RouterRouterPCRecorderIP address: 192.168.1.1Subnet mask: 255.255.255.0IP address: 192.168.1.100Subnet mask: 255.255.255.0Default gateway: 192.168.1

77Display the operation windowStep 1Start the web browser.Step 2Enter the IP address or URL assigned to the recorder into the [Address] box, and then

78About the operation window[Control] button (☞ page 79)It is possible to operate the switcher functions of the camera such as switching the camera ch

79[Cam. select] boxImages from the selected camera channel will be dis-played on a 1-screen in the image display area by clicking the button. [Multisc

8Recording modeIt is possible to directly connect up to 16 cameras to the recorder and record images from them on the hard disk drives.The following r

80[Ch]: A camera channel used for recording will be displayed.[Evt]: Event type will be displayed. (☞ Page 8)[HDD]: The hard disk drive number in whic

81 q The status of image (live image/recorded image) display operation will be displayed. : Indicates that live images are being dis-played. :

82[REW] buttonPlays recorded images in reverse at high speed. Playback speed of fast reverse playback will change in the following order each time thi

83 • Whenthe[Timeslip]buttonorthe[Reversetimeslip] button is clicked, the start point after the jump may sometimes be at a point several se

84BrightnessThe brightness (lens aperture) can be adjusted by clicking the [–] (darker) button or the [+] (brighter) but-ton. It is possible to reset

85Step 1Display the top page of the operation window. (☞ Page 77)Step 2Select the camera channel from which images to be displayed. Click the camera

86Step 1Click any of the [x1], [x2] and [x4] buttons to change the zoom factor of the electronic zoom. Note: • Clickingapointinthezoomedim

87Step 1Display the top page of the operation window. (☞ Page 77)Step 2Click a multiscreen selection button in the [Multiscreen select] box. (4-scre

88Step 1Display the top page of the operation window. (☞ Page 77)Step 2Click the button in the [Sequence] box. → Live images from multiple cameras w

89Record imagesStep 1Display the top page of the operation window. (☞ Page 77)Step 2Click the [HDD] tab. → The [HDD] tab will be displayed. Step 3Cl

9Major operating controls and their functions q Status indicatorsERROR: Blinks when an error that can become a problem for the recorder to run the sy

90Play recorded imagesStep 1Display the top page of the operation window. (☞ Page 77)Step 2Click the [HDD] tab. → The [HDD] tab will be displayed. S

91Playback operation Function Button OperationPause  • Playbackwillbepausedwhenthisbuttonisclickedduringplay-back.  • Playbackwillresu

92Step 1Display the top page of the operation window. (☞ Page 77)Step 2Click the [HDD] tab. → The [HDD] tab will be displayed. Step 3Click the [Go t

93Search and playNumber of the listed dataDisplays the total number of listed copied data. When more than 10 000 data matched, the ">10000&quo

94Step 1Display the top page of the operation window. (☞ Page 77)Step 2Select "HDD" for "Disk/Media" in the [Search] box, and the

95REC event: Select an event type of recorded images to be searched for from the following. The check-box respective to the selected event type will b

96Step 1Display the top page of the operation window (☞ page 77), and then select the camera channel to be searched for in the [Cam. select] box. Ste

97Specify the mask duration Click the [C] button, and then select the mask dura-tion from the following. 1 s, 1 min, 1 h, 24h When the mask durati

98Number of the listed dataDisplays the total number of listed copied data. When more than 10 000 data matched, the ">10000" indi-cation

99Step 1Insert an SDHC/SD memory card on which recording data is copied into the SDHC/SD memory card slot. When recording data was copied on a DVD, in