Panasonic WV-ASC970 Instrukcje Operacyjne Pobierz pdf (Strona 70)

[LOG]

***{ This section is optional. It is not required unless }

***{ System defaults are not acceptable. Delete the }

***{ single asterisks below to make this section active. }

***{ Log generation/save characteristics }

  ***{Format:<LogFileName>=<Minutes>,<Days> }

  ***{Minutes=FrequencytocopytoHD(1-30min)}

  ***{Note:Valuesoutsidethisrange=1min. }

  ***{Days=daystosaveonHD(5-30) }

  ***{Mode=0-off(default) }

***{ 1 - on }

UserLog=10,7,1

SwLog=10,7,0

AlarmLog=10,7,1

VideoLossLog=10,7,1

RS232ALARM section

Note:

 • ThissectionislegacysettingforexistingWJ-MPU955andshouldnotbechanged.

All RS232C ports can be set in the admin console for the alarm interface. This section describes the

characteristics for the external alarm port only. Other use of the port, such as for an external controller,

must be configured using the admin console.

[RS232ALARM]

***{ This section is optional. It is not required unless }

***{ System defaults are not acceptable. Delete the }

***{ single asterisks below to make this section active. }

***{ Enable/Disable Serial Alarms by port }

  ***{Format:AlarmPort=<port1>,<port2>,<port3> }

  ***{port#=use"1"toindicatedesiredport(onlyone) }

  ***{port#=use"0"toindicateportsnotdesired }

*AlarmPort=1,0,0

ALARMTEXTDISPLAY section

This section sets up the characteristics of the alarm text - whether alarm text only or alarm and action

text.

There is a 38 character maximum for alarm text.

[ALARMTEXTDISPLAY]

***{ This section is optional. It is not required unless }

***{ System defaults are not acceptable. Delete the }

***{ single asterisks below to make this section active. }

***{ Alarm Text Display format }

  ***{Format:AlarmTextDisplay=<option> }

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 78 79

Brak uwag

Panasonic WV-ASC970 Instrukcje Operacyjne Strona 70