Panasonic NVMX500B Instrukcje Operacyjne Pobierz pdf (Strona 50)

Others

-50-

3: The Movie Camera power does not stay on long

enough.

• Is the Battery low? Charge the Battery or attach a fully

charged Battery. (

-7-)

• Has condensation occurred? Wait until the Condensation

Indication disappears. (

-48-)

Battery

1: Battery runs down quickly.

• Is the Battery fully charged? Charge it with the AC

Adaptor. (

-7-)

• Are you using the Battery in an extremely cold place? In

cold places, the operating time of the Battery becomes

shorter. (

-48-)

• Has the Battery worn out? If the operating time is still too

short even after the Battery is fully charged, the Battery

has worn out.

2: The Battery cannot be charged.

• If the DC Input Lead is connected to the AC Adaptor,

charging cannot be performed. Disconnect the DC Input

Lead.

Normal Recording

1: Recording does not start although power is supplied

to the Movie Camera and the Cassette is correctly

inserted.

• Is the accidental erasure prevention slider on the Cassette

open? If it is open (set to [SAVE]), recording cannot be

performed. (

-9-)

• Is the tape wound to the end? Insert a new Cassette. (

-9-)

• Is the Movie Camera power turned on? (

-14-)

• Is the [CAMERA] Lamp on? If the [CAMERA] Lamp is not

on, no recording function can be operated. (

-14-)

• Has condensation occurred? Wait until the Condensation

Indication disappears. (

-48-)

Other Recording

1: Auto Focus Function does not work.

• Is Manual Focus Mode selected? If Auto Focus Mode is

selected, focus is automatically adjusted. (

-20-)

• There are some recording subjects and recording

surroundings for which the Auto Focus Function does not

operate correctly. In this case, use the Manual Focus

Mode to adjust the focus. (

-51-)

Editing

1: Audio dubbing cannot be performed.

• Is the accidental erasure prevention slider on the Cassette

open? If it is open (set to [SAVE]), recording cannot be

performed. (

-9-)

• Are you attempting to edit a tape portion that was recorded

in LP Mode? LP Mode does not allow audio dubbing to

operate. (

-13-)

Indications

1: The Time Code becomes inaccurate.

0 The Time Code Indication counter may not be constant in

the reverse direction in Slow Motion Playback Mode, but

this is not a malfunction.

2: The Remaining Tape Time Indication disappears.

• When you record still pictures in Photoshot Mode, the

Remaining Tape Time Indication may disappear

temporarily. However, it reappears when recording

normally.

3: The Remaining Tape Time Indication does not match

the actual remaining tape time.

• If scenes of less than 15 seconds are continuously

recorded, the remaining tape time cannot be displayed

correctly.

• In some cases, the Remaining Tape Time Indication may

show remaining tape time that is 2 to 3 minutes shorter

than the actual remaining tape time.

Playback (Pictures)

1: Pictures cannot be played back even when the [1]

Button is pressed.

0 Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the

playback function cannot be used. (

-24-)

2: Mosaic-pattern noise appears on images during Cue,

Review or Slow Motion Playback.

• This phenomenon is characteristic of digital video

systems. It is not a malfunction.

3: Although the Movie Camera is correctly connected to

a TV, playback images cannot be seen.

• Have you selected “Video Input” on the TV? Please read

the operating instructions of your TV and select the

channel that matches the input sockets used for the

connection.

4: Playback picture is not clear.

• Are the heads of the Movie Camera dirty? If the heads are

dirty, playback image cannot be clear. (

-48-)

Playback (Sound)

1: Sound is not played back from the built-in speaker of

the Movie Camera or the headphones.

0 Is the volume too low? During playback, keep pressing the

[PUSH] Dial until the [VOLUME] Indication appears. Then,

turn the [PUSH] Dial to adjust the volume. (

-24-)

2: Different sounds are reproduced at the same time.

• [12bit AUDIO] on the [PLAYBACK FUNCTIONS]

Sub-Menu of the [VCR FUNCTIONS] Main-Menu has

been set to [MIX]. As a result, the original sound and

sound that was recorded by audio dubbing are played

back together. It is possible to reproduce the sounds

separately. (

-28-)

3: The original sound was erased when audio dubbing

was performed.

• If you perform audio dubbing on a recording done in [16bit]

Mode, the original sound will be erased. If you wish to

preserve the original sound, be sure to select [12bit] Mode

at the time of recording.

4: Sounds cannot be played back.

• Although a Cassette with no audio dubbing is being

played, is [12bit AUDIO] on the

[PLAYBACK FUNCTIONS] Sub-Menu of the

[VCR FUNCTIONS] Main-Menu set to [ST2]? To play back

a Cassette with no audio dubbing, [12bit AUDIO] must be

set to [ST1]. (

-28-)

• Is the Variable Speed Search Function working? Press the

[1] Button to cancel the Variable Speed Search Function.

(

-24-)

Card

1: Recorded pictures are not clear.

0 Is [PICTURE QUALITY] on the [CARD SETUP] Sub-Menu

set to [NORMAL] or [ECONOMY]? If recording is done

with it set to [NORMAL] or [ECONOMY], images with fine

details may include a mosaic-like pattern. Set

[PICTURE QUALITY] to [FINE]. (

-31-)

2: Card Photoshot Playback images do not look normal.

• The picture may be damaged. In order to prevent the loss

of image data, backing up on a Cassette or a personal

computer is recommended. (

-33-, -38-)

3: During Playback the [k] Indication is displayed.

• The image was either recorded in a different format, or

data is damaged.

4: Even if a Card is formatted, it cannot be used.

• Either the Movie Camera or the Card may be damaged.

Please consult a dealer.

B5-B.book 50 ページ２００２年８月３０日　金曜日　午前１０時４０分

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

Panasonic NVMX500B Instrukcje Operacyjne Strona 50

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kamery ochrony Panasonic NVMX500B