Panasonic WV-SW558 Przewodnik Instalacji Pobierz pdf (Strona 24)

Caution:

• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED

POWER SOURCE (IEC/EN/UL/CSA 60950-1).

Before starting the connection, turn off the power of this camera and the devices to be connected.

Check and prepare the required devices and cables for connection.

Note:

• When using the mount bracket (accessory), it is possible to connect the cables after mounting

the camera onto the mount bracket.

• Refer to page 19 when connecting the conduit.

Connection

Network cable

RJ-45 (female)

Alarm input/output cable 4P alarm cable (accessory)

LAN cable (category 5 or better)

Power cable

(12 V DC)

2P power cable (accessory)

12 V DC (red)

GND (black)

Microphone/line input cable (white)

Audio output cable (black)

SW559

Power cable

12 V DC

Red Positive

Black Negative

z Connect the microphone/line input cable and the microphone (for use of the audio reception

function).

SW559

Input impedance: 2 kΩ±10 %

Recommended cable length: Less than 1 m {3.28'} (for microphone input)

Less than 10 m {32.8'} (for line input)

Recommended microphone: Plug-in power type microphone (option)

Connect a monaural mini plug (ø3.5 mm).

Supply voltage: 2.5 V ±0.5 V

Recommended sensitivity of microphone: −48 dB ±3 dB (0 dB=1 V/Pa,1 kHz)

IMPORTANT:

• Connect/disconnect the external speaker cables or audio/video cables after turning off the

power of the camera and the amplifier. Otherwise, loud noise may come out from the speaker.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Brak uwag

Panasonic WV-SW558 Przewodnik Instalacji Strona 24