Panasonic WV-SC588 Przewodnik Instalacji Pobierz pdf (Strona 21)

Step 7

Mount the camera onto the camera mount bracket

(accessory). Fit the lock plate of the camera onto the

guide part of the camera mount bracket, and rotate the

camera clockwise after inserting the camera while putting

the center of the camera onto the center of the camera

mount bracket.

Center of the

camera mount bracket

Guide part

Approx. 20 °

Lock plate

IMPORTANT:

 • When mounting the camera onto the cameramount

bracket, hold the fixed section of the unit. Mounting

the camera while holding the dome section may result

in malfunction.

Step 8

Fix the camera on the camera mount bracket (accessory)

using the camera fixing screw (M3, accessory).

Recommended tightening torque: 0.68 N·m {0.50 lbf·ft}

Fixing screw

(M3, accessory)

Step 9

Connect a LAN cable and power cable to the camera.

Connect a LAN cable to the camera.

After connecting a LAN cable to the camera, connect an

AC adaptor to the 12 V DC power supply terminal.

IMPORTANT:

 • Do not touch the camera in theprocess of initializa-

tion. Otherwise, it may fail to initialize and may cause

malfunction.

Network connector

12 V DC power supply terminal

• Network connector

Connect a LAN cable (category 5 or better) to the network

connector.

IMPORTANT:

 • Useall4pairs(8pins)oftheLANcable.

 • Themaximumcablelengthis100m{328feet}.

 • Make sure that the PoE device in use is compliant

with IEEE802.3af standard.

 • When connecting both the 12 V DC power supply

and the PoE device for power supply, 12 V DC will be

used for power supply.

If a 12 V DC power supply and a PoE hub or router

are used at the same time, network connections may

not be possible. In this case, disable the PoE settings.

Refer to the operating instructions of the PoE hub or

router in use.

 • WhentheLANcableisdisconnectedonce,reconnect

the cable after around 2 seconds. When the cable is

quickly reconnected, the power may not be supplied

from the PoE device.

 • Thenetworkcameraisonlyintendedforaconnection

to an ethernet or PoE network without routing to the

outside plant.

Fixed

section

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Komentarze do niniejszej Instrukcji

Brak uwag

Panasonic WV-SC588 Przewodnik Instalacji Strona 21

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kamery ochrony Panasonic WV-SC588